E-mail: sales@winnix.net

R2000 Chip High Power Uhf Rfid Reader Module with Four Antenna Ports

Products Mode: HYM750P
Chip: Impinj R2000
Fixed Current: ≤1.2 A
Fixed Power: 30dBm
Stepping Interval: 1dBm
Tag Protocol: EPC C1G2/ISO18000-6C
Typical Read Range: 10m with 8dBi rfid antenna


tubiao.png Brief introduction

HYM750P UHF RFID reader uses R2000 chip, which complies with EPC C1G2 protocol, its working frequency is 840~960MHz,with LBT function(Customizable). It supports dense reader working mode (DRM). Max Power is 31dbm.With standard 8dBi antenna,the reading distance can reach 15meters, maximum identifying speed can reach 400/S; with simple power supply and interface circuit, a high-performance RFID system can be established. It is suitable for logistics, costume, medical industry, and complex assets management, etc. It is well used in high performance fixed readers.


tubiao.png Technical data

No Item Technical data Unit Remark
1Max current1600mAMax power output
2Standby current≤1mAEN pin low level
3Frequency range840~960MHz 
4Defaul working frequencyFrequency hoppingMHzFrequency interval 250KHz
5Channel bandwidth≤250KHz 
6Frequency hopping speed≤2s 
7Fixed power31dBm 
8Stepping interval1dB5~30dBm, adjustable by software
9Label protocolEPC C1G2
/ISO18000-6C
  
10Communication protocolAsynchronos serial ports protocol  
11Starting time≤50ms 
12Radio-frequency power rising time≤500μs 
13Radio-frequency power droping time≤500μs 
14Adjacent channel power leaking ratio≤-40dB±1CH
≤-60dB±2CH
15Frequency stablizing ratio±10ppm-25℃~+40℃
±20ppm-40℃~+60℃
16Max reading range>15m8dBi antena
17Muti-tags>400/s  


tubiao.png Characteristics of DC

Data Mini value Typical value Max value Unit Remark
Voltage of power3.345.5VDirect current
Input high level23.33.5VGPIO
23.33.5VEN
Input low level-0.500.5VGPIO
--0.18VEN
Output high level2.3-3.3VGPIO
Output low level0-1VGPIO
Enable current2525uAVEN≥2V


tubiao.png Requirement on antenna

No Item Technical data Unit Remark
1VSWR≤1.5  


tubiao.png Appearance and structure

• Size: 76.5×39.7×9mm
• Weight: 50g

1.jpg


tubiao.png Interface definition

PinSignal nameSignal directionFunction/compatibility description
1VCCInputModule supplying power
2VCCInputModule supplying power
3GND-Module connecting ground
4GND-Module connecting ground
5ENInputModule enabling,highly effective
6GPIOBidirectionGeneric port
7GPIOBidirectionGeneric port
8GPIOBidirectionGeneric port
9UART_RXInputAsynchronous serial interface receiving
10UART_TXOutputAsynchronous serial interface sending
11DBG_RX-Test port
12DBG_TX-Test port


tubiao.png 6pin debug Interface definition

Pin

Signal name

Signal direction

Function/compatibility description

1

VCC

Input

Module supplying power

2

GND

-

Module connecting ground

3

EN

Input

Module enabling,highly effective

4

GPIO

Bidirection

Generic port

5

UART_RX

Input

Asynchronous serial interface receiving

6

UART_TX

Output

Asynchronous serial interface sending

NOTICE:The 6 pin interface is for debug

tubiao.png Environment requirement

No Item Technical data Unit Remark
1Working temperature-25~+75 
2Storage temperature-40~+85 
3Relative humidity10%~90%RH