Single Antenna Port R500 Chip UHF Rfid Reader Module

Description

Brief Introduction

HYM730 UHF RFID reader module uses R500 chip, which complies with EPC C1G2 protocol, its working frequency is 840~960MHz. It supports dense reader working mode（DRM）。With standard 8dBi antenna，the reading distance can reach up to 7 meters, maximum identifying speed can reach up to 200/S. With simple power supply and interface circuit, a high-performance RFID system can be established. It is suitable for logistics, costume, medical industry, and complex assets management, etc.

Technical Data

No	Item	Technical data	Unit	Remark
1	Fixed current	1.5	A	Max power output
2	Standby current	≤1	mA	EN pin low level
3	Frequency range	840～960	MHz
4	Default working frequency	Frequency hopping	MHz	Frequency interval 250KHz
5	Channel bandwidth	≤250	KHz
6	Frequency hopping speed	≤2	s
7	Fixed power	30	dBm
8	Stepping interval	1	dB	5~30dBm， adjustable by software
9	Label protocol	EPC C1G2 /ISO18000-6C
10	Communication protocol	Asynchronous serial ports protocol
11	Starting time	≤50	ms
12	Radio-frequency power rising time	≤500	μs
13	Radio-frequency power dropping time	≤500	μs
14	Adjacent channel power leaking ratio	≤-40	dB	±1CH
14	Adjacent channel power leaking ratio	≤-60	dB	±2CH
15	Frequency stabilizing ratio	±10	ppm	-25℃～+40℃
15	Frequency stabilizing ratio	±20	ppm	-40℃～+60℃
16	Max reading range	7	m	8dBi antenna

Characteristics of DC

Data	Mini value	Typical value	Max value	Unit	Remark
Voltage of power	3.6	-	5	V	Direct current
Input high level	2	3.3	3.5	V	GPIO
Input high level	2	-	5	V	EN
Input low level	-0.5	0	0.5	V	GPIO
Input low level	-	-	0.18	V	EN
Output high level	2.3	-	3.3	V	GPIO
Output low level	-	0	1	V	GPIO
Enable current	2	5	25	uA	VEN≥2V

Requirement on Antenna

No	Item	Technical data	Unit	Remark
1	S11	≤-10dB

Appearance and Structure

• Dimensions:56×36×7.4mm
• Weight：40g

Interface Definition

• Front Interface:

Pin	Signal name	Signal direction	Function/compatibility description
1	VCC	Input	Module supplying power
2	VCC	Input	Module supplying power
3	GND	-	Module connecting ground
4	GND	-	Module connecting ground
5	EN	Input	Module enabling，highly effective
6	GPIO	Bidirection	Generic port
7	GPIO	Bidirection	Generic port
8	GPIO	Bidirection	Generic port
9	UART_RX	Input	Asynchronous serial interface receiving
10	UART_TX	Output	Asynchronous serial interface sending
11	DBG_RX	-	Test port

• Back Interface:

Pin	Signal name	Signal direction	Function/compatibility description
1	VCC	Input	Module supplying power
4	GND	-	Module connecting ground
5	EN	Input	Module enabling，highly effective
6	GPIO	Bidirection	Generic port
9	UART_RX	Input	Asynchronous serial interface receiving
10	UART_TX	Output	Asynchronous serial interface sending

Environment Requiremen

No	Item	Technical data	Unit	Remark
1	Working temperature	-25～+75	℃
2	Storage temperature	-40～+85	℃
3	Relative humidity	10%～90%	RH

Certification

FCC ID: RVZHYM740
CE: ETSI EN 302 208
ETSI EN 301 489
ETSI EN50364

Video Description