HYR832 UHF RFID Reader - Winnix Technologies

Support EPC C1Gen2V2.0 and EPC C1Gen2V1.2；
Support ISO18000-6C；
Support ISO18000-6D；
Support GB29768；
maximum power output is 31.5dbm
Reading speed is 400 tags/sec.
Support 8 SMA female antenna ports
Support temperature protection, automatically stop working when the temperature exceed 85 degrees Celsius . And restart work when the temperature is below 85 degrees Celsius.
Support antenna failure detection
Support FastID、Tagfocus、QT、QTWrite、QTRead、BlockWrite、BlockErase、BlockPermalock、Etc；
Ultra-fast label writing mode, writing 12 bytes EPC within 50ms；
Support antenna port±8K ESD、±1K Surge test，high reliable
Support Network port、RS232、USB、RS485/GPIO etc
Suitable for garment, retail, electricity, books, warehousing, industrial automation and other industries;


Environment requirement

Appearance and structure

Size（L×W×H）：140×115×30mm

Weight：350g

Positioning hole：130*90mm φ5mm screw

Technical Specifications

No	Item	Technical data	Remark
1	Fixed current	800mA	Max power output@12V
2	Standby current	≤1mA	EN pin low level
3	Frequency range	840～960MHz
4	Default working frequency	Frequency hopping	Frequency interval 250KHz
5	Channel bandwidth	250KHz
6	Frequency hopping speed	≤2s
7	Fixed power	31.5 ±1dBm
8	Stepping interval	1dB
9	Label protocol	EPC C1G2/ISO18000-6C
10	Communication protocol	Asynchronous serial ports protocol	RS232 Label
11	Starting time	≤50ms
12	Radio-frequency power rising time	≤500μs
13	Radio-frequency power dropping time	≤500μs
14	Adjacent channel power leaking ratio	≤-40dB	±1CH
14	Adjacent channel power leaking ratio	≤-60dB	±2CH
15	Frequency stabilizing ratio	±10ppm	-25℃ ～+40℃
15	Frequency stabilizing ratio	±20ppm	-40℃ ～+60℃
16	Max reading range	10m	8dBi antenna
17	Multi-tags	400pcs/s

6PIN 3.81mm Interface definition

Pin	Signal name	Signal direction	Function and compatibility description
1	RS485A		RS485A
2	GND		Ground
3	RS485B		RS485B
4	RS232_TX	output	RS232_TX
5	GND		Ground
6	RS232_RX	input	RS232_RX

RF interface：

SMA Female