Single Antenna Port R500 Chip UHF Rfid Reader Module

Products Mode: HYM730
Chip: Impinj R500
Fixed Current: ≤1.5 A
Fixed Power: 30dBm
Stepping Interval: 1dBm
Tag Protocol: EPC C1G2/ISO18000-6C
Typical Read Range: 7m with 8dBi rfid antenna


tubiao.pngBrief Introduction

HYM730 UHF RFID reader module uses R500 chip, which complies with EPC C1G2 protocol, its working frequency is 840~960MHz. It supports dense reader working mode(DRM)。With standard 8dBi antenna,the reading distance can reach up to 7 meters, maximum identifying speed can reach up to 200/S. With simple power supply and interface circuit, a high-performance RFID system can be established. It is suitable for logistics, costume, medical industry, and complex assets management, etc.


tubiao.png Technical Data

No Item Technical data Unit Remark
1Fixed current1.5AMax power output
2Standby current≤1mAEN pin low level
3Frequency range840~960MHz 
4Default working frequencyFrequency hoppingMHzFrequency interval 250KHz
5Channel bandwidth≤250KHz 
6Frequency hopping speed≤2s 
7Fixed power30dBm 
8Stepping interval1dB5~30dBm, adjustable by software
9Label protocolEPC C1G2
/ISO18000-6C
  
10Communication protocolAsynchronous serial ports protocol  
11Starting time≤50ms 
12Radio-frequency power rising time≤500μs 
13Radio-frequency power dropping time≤500μs 
14Adjacent channel power leaking ratio≤-40dB±1CH
≤-60dB±2CH
15Frequency stabilizing ratio±10ppm-25℃~+40℃
±20ppm-40℃~+60℃
16Max reading range7m8dBi antenna


tubiao.png Characteristics of DC

Data Mini value Typical value Max value Unit Remark
Voltage of power3.6-5VDirect current
Input high level23.33.5VGPIO
2-5VEN
Input low level-0.500.5VGPIO
--0.18VEN
Output high level2.3-3.3VGPIO
Output low level-01VGPIO
Enable current2525uAVEN≥2V


tubiao.png Requirement on Antenna

No Item Technical data Unit Remark
1S11≤-10dB  


tubiao.png Appearance and Structure

• Dimensions:56×36×7.4mm
• Weight:40g

1.jpg


tubiao.png Interface Definition

Front Interface:

Pin Signal name Signal direction Function/compatibility description
1VCCInputModule supplying power
2VCCInputModule supplying power
3GND-Module connecting ground
4GND-Module connecting ground
5ENInputModule enabling,highly effective
6GPIOBidirectionGeneric port
7GPIOBidirectionGeneric port
8GPIOBidirectionGeneric port
9UART_RXInputAsynchronous serial interface receiving
10UART_TXOutputAsynchronous serial interface sending
11DBG_RX-Test port


Back Interface:

Pin Signal name Signal direction Function/compatibility description
1VCCInputModule supplying power
4GND-Module connecting ground
5ENInputModule enabling,highly effective
6GPIOBidirectionGeneric port
9UART_RXInputAsynchronous serial interface receiving
10UART_TXOutputAsynchronous serial interface sending


tubiao.png Environment Requiremen

No Item Technical data Unit Remark
1Working temperature-25~+75 
2Storage temperature-40~+85 
3Relative humidity10%~90%RH 


tubiao.png Certification

FCC ID: RVZHYM740
CE: ETSI EN 302 208
ETSI EN 301 489
ETSI EN50364